Sealmaster is a division of  Dixon International Group Limited

Telephone: 01223 832851    Contact Us

Fire Door Seals Product Selector

FIRE ONLY   FIRE AND SMOKE

30 Min

60 Min

Single Acting Single Door

30 Min

60 Min

FD30
FD60
FD30S
FD60S
  SEAL TYPE: To jambs and head   SEAL TYPE: To jambs and head

IF30

IF60

N30

N60

  SEAL TYPE: To jambs and head Double Acting Single Door   SEAL TYPE: To jambs and head

IF30

IF60

IMN

N60S

  SEAL TYPE: To striking edge of frame   SEAL TYPE: To striking edge of frame

IMP

IMP

IMP

IMP

  SEAL TYPE: To jambs and head Single Acting Double Door   SEAL TYPE: To jambs and head

IF30

IF60

N30

N60

  SEAL TYPE: Flush meeting stiles if one door
  bolted to one leaf only
  SEAL TYPE: Flush meeting stiles if one door
  bolted to one leaf only

IF30

IF60

N30

N60

  SEAL TYPE: Flush meeting stiles if both doors
  operational
  SEAL TYPE: Flush meeting stiles if both doors
  operational

IF30/IMP

IF60/IMP

IMN/IMP

N60S/IMP

  SEAL TYPE: If rebated meeting stiles to each leaf   SEAL TYPE: If rebated meeting stiles to each leaf

IF30

IF60

N30

IF30

  SEAL TYPE: To jambs and head   SEAL TYPE: To jambs and head

IF30

IF60

Double Acting Double Door

IMN

N60S

  SEAL TYPE: Meeting stiles   SEAL TYPE: Meeting stiles

IF30/IMP

IF60/IMP

IMN/IMP

N60S/IMP

specification notes


On untested doorsets or those of unknown behaviour Sealmaster Ultima seals may be able to offer protection above and beyond that available from a single type of intumescent strip. Please contact Sealmaster technical services for advice where there are any doubts about suitability.

On all 60 minute doors additional protection is required at all ironmongery positions. Sealmaster recommend the use of their intumescent plugs to fulfil this role. Seals can be fitted into either door or frame. Sealmaster recommend that, wherever possible, they should be fitted into the frame to enable doors to be hung with an accurate and constant gap between the door and the frame.



FIRE DOOR SEALS

    • Sealmaster IF30

resources

  • Print Page

    Print this page